Yota-SCX Body Mount Kit

Dinky R/C


$ 42.50




Share this product


Dinky R/C has created this simple to install Yota-to-SCX10 body mount kit!
For those of you that want to mount either the Tamiya, or RC4WD, versions of the Toyota Hilux bodies,
This 3-Piece Kit will help you sort out getting started with your build!






Rock Sliders / Cab Mounts line up with your stock skid plate bolt locations, on the frame rails. 
You may need slightly longer screws here, due to the added 3mm of thickness of the mounting area.
One should be able to re-use the body mounting hardware, and inserting them
thru the furthest apart holes provided, at the lowest portion of the cab sides.






Rear Skid / Bed Mount mounts to the rear of your chassis, using (4pcs) 3mm hardware. 
The Tamiya version Has two small holes, underneath the tailgate, that use the (2) 2/56" hardware. 
The RC4WD TrailFinder body does not have these holes in the body,
and must be drilled to use the rear facing holes of the rear skid.

Bed to Cab connection length may need adjusted to suit, the 4 bolts that attach them to one another.
Elongating the connection holes, to accommodate RC4WD TF2 body type,
as they are slightly different in length at that spot.
Take care when marking and drilling the holes below the tailgate.
They should be 4mm on center, from the bottom edge of that area.


Includes 3pcs. printed body mounts & 2pcs.2/56" hardware.

3D Printed from Black ABS plastic
(Due to the process of 3D Printing, some minor finish imperfections may occur,
but do not effect performance of product.)

Hardware NOT included

Please allow 2-3 business days for shipping.