RC4WD Trail Finder 2 "Stealth" Mount


$ 10.00 $ 42.50




Share this product


The sleek design of the Dinky R/C "Stealth" Mounting system lowers your battery by 10mm into the chassis.
By relocating your battery to between the rear frame rails, you'll gain a slightly lower center of gravity, increasing the stability of your rig.
While it also provides mounting location for a micro servo, for your 2-speed gear changes. (Emax ES08MA 9gram servo NOT included)

Battery area will fit up to a 2200mah 3s lipo, which becomes easily accessible using the latching fuel cell mechanism. Conveniently located under the rear of the bed, disguised as your fuel tank for added scale detail. It requires no tools, body clips, or screws in order to remove and replace the battery. NO LONGER are you required to remove your body, in order to change your battery in your RC4WD Tf2 with Dinky R/C 's "Stealth" Mount!

When used in conjunction with our "Simple Slider" Brackets, it will allow you to remove the stock battery/ electronics mount entirely, moving your battery and electronics lower onto the chassis. In turn, lowering your CG, while giving you more room for interior and scale detail work.

The top of "Stealth" Mount does not protrude any taller than the stock rear shock mount. Keeping all the bed clearance you had before, while better utilizing the space in our opinion! Battery strap may be used to further secure your battery, by utilizing the T6 Aluminum rods that span the length of the battery area. But is not required.

Shown here in grey, for visual purposes only. Product shipped will be 3d printed in black, unless custom color is ordered specifically.
Contact us directly for more information and current color choices.

3mm Hardware is Included for installation
Aluminum Shift Rod is included, with Ball-ends for each side
Servo and Battery are NOT included


Now also available as a digital download! 
With 2 options to choose from, with or without simple sliders. 
And now ALSO INCLUDES optional electronics tray for the Stealth Mount!

When printing this yourself, you'll also need to fabricate an 1/8" Solid Aluminum rod at 155mm long. Bend at 70mm to suit, and tapped 3mm at both ends. Long side uses "standard" sized ball ends, short size uses suitable small ball end to attach to micro servo. 

 

By purchasing this file, you are accepting the terms and conditions of the licensing for these files.

This work is licensed under
PERSONAL USE - NO DERIVATIVES LICENSE

Summary - No Sharing. No Selling. No remixing to share/sell. Print at Home or Work for personal use.

I have provided these STL's for your personal use and enjoyment, and so that you may re-print them if you ever incur breakage of the printed part. I believe in encouraging individuals creativity, with parts that can be made and enjoyed from the comfort of their own home.

You are permitted to print or produce these works in any media that you like for your own personal use. You are permitted to have the files produced by any shop or individual of your choosing if you are unable to do so yourself.

What if a friend wants me to print one for them? If a friend would like you print a file for them, please have them purchase the STL prior to printing it for them. These designs take a lot of time and money to develop and I appreciate your support and integrity.